Funke’s TPL brazed plate heat exchanger has been developed for mechanical engineering and plant engineering  - for cooling of hydraulic oils and motor oils. etc.)

 

Higher viscosity media are handled with our much smaller Funke TPL compared with standard plate heat exchanger designs.  The volume of the flow gap is approximately 80% larger than standard brazed plate heat exchangers.  The large gap, combined with our special turbolators and diagonal media flows allow larger diameter connects and result in very high heat transfer rates.  

 

Applications:  System separation (heating, cooling, condensing), waste heat recovery, process, hydraulic and motor oil cooling, and other industrial applications where small size and high efficiencies are needed.

 

Limit conditions:

•operating pressure max. 30 bar

•operating temperature min.-160°C, max. +200°C

•heat duty 2.0 o 2000 kW

 

Caution: on principle brazed plate heat exchangers are unsuited for: seawater, ammonia, de-mineralized water, silicone oil and high-chloride media.